3240 Panianiani Epoxy Laminate

ʻO ka wehewehe pōkole:

ʻO ka papa epoxy o kēia huahana: ua hoʻopaʻa ʻia ka lole fiber aniani me ka resin epoxy a hana ʻia e ka hoʻomehana ʻana a me ke kaomi ʻana.ʻO ke kumu hoʻohālike ʻo 3240. Loaʻa iā ia nā waiwai mechanical kiʻekiʻe ma ka mahana wela a me nā waiwai uila paʻa i ka wela kiʻekiʻe.He kūpono ia no nā ʻāpana hoʻolālā kiʻekiʻe no ka mīkini, nā mea uila a me nā mea uila, me nā waiwai mechanical a me dielectric kiʻekiʻe, maikaʻi ka wela a me ka pale ʻana i ka wai.Papa E (125 degere).

Mānoanoa maʻamau: 0.5 ~ 100mm
Nui mau: 1020×2040mm
Hoʻomaʻamaʻa ʻia a hoʻoheheʻe ʻia i kahi mahana kiʻekiʻe o 180 ℃, maʻamau ʻaʻole wela me nā metala ʻē aʻe, hiki ke hoʻololi i ka pepa metala.

E hoʻouna i ka leka uila iā mākou

Huahana Huahana

Nā hiʻohiʻona noi

1. Nā ʻano like ʻole.
2. Maʻalahi e ho'ōla.

3. Pili ikaika.
4. Nā ʻano like ʻole.

Nā kikoʻī huahana

ʻAʻOLE.	NA WAIWAI	UNIT	WAIWAI MAU
1	ʻO ka ikaika flexural perpendicular to laminations A: Ma lalomaʻamaukūlana E-1/150: Ma lalo o 150±5℃	MPa	≥ 340
2	Notch Impact ikaika like me ka lamination(charpy)	kJ/m²	≥33
3	ʻO ke kūpaʻa ʻana i ka hoʻokaʻawale ʻana ma hope o ka hoʻokomo ʻia ʻana i loko o ka wai (D-24/23)	Ω	≥5.0X10⁸
4	Ka ikaika dielectric perpendicular to lamination(i loko o ka aila 90±2 ℃)1.0mm ka mānoanoa	MV/m	≥14.2
5	Puke uila parallel ilamination (i loko o ka aila 90±2 ℃)	kV	≥35
6	ʻAe (48-62Hz)	-	≤ 5.5
7	ʻAe (1MHz)	-	≤5.5
8	Mea hoʻoheheʻe (48-62Hz)		≤0.04
9	hale hana hoʻopau (1MHz)		≤0.04
10	Ka hoʻoheheʻe waiD24/23, 1.6mm ka mānoanoa	mg	≤19
11	ʻO ka mānoanoa	g/cm³	1.70-1.90
12	Ka hikiwawe	Papa	-
13	kalakala		Kūlohelohe